Led Spot Moving Head 100W Spot Stage Lighting Gobo Moving Head Light Led Disco Lighting
Technical information:
Voltage:AC110～240V 50Hz/60Hz
Power:100W(COB pure white LED)
DMX Channels:14CHS, with RDM function
Fix Gobo wheel: 7gobos+open
Rotation gobo wheel: 6 glass gobos +open
Color wheel: 7 colors+open
Prism: 3 facet prisms
Strobe, focus function
Dimming: 0%-100% linear dimming function
Control Mode:DMX512/Master Slave /Sound-active
Pan Scanning:540 degree, 16bits
Tilt Scanning:180 degree, 16bits
Strobe:1-25times/second or random strobe
Display: LCD display
N/W: 6kg
Rated Power: 120W
Glass gobo wheel:
Fixed gobo wheel;
Display Board Function:
| Menu | Specifications |
| Running mode | DMX | Slave mode:it accepts the signal from the controller or master machine |
| Auto run slowly | |
| Auto run Randomly | |
| Sound active |
| DMX Address | 1~512 | Press keyboard “ENTER” to enter the edit State. It is hundred digits, Press keyboard “ENTER” Twice times, it is ten digits, Press keyboard”ENTER” three times, it is unit digits. Press keyboard” UP” “DOWN” to change the address co. Press keyboard “ENTER” once again, exit edit state |
| DMX | 14CH | 14CHS |
| RDM | Off | |
| On | |
| Pan reverses | Off | |
| On | |
| Tilt reverses | Off | |
| On | |
| Pan and tilt exchange | Off | |
| On | Exchange the channels of pan/tilt(it is include in pan fine or tilt fine) |
| Pan and Tilt encoder | On | Use encoder (optocoupler) to determine out of step and automatically correct position |
| Off | Don’t use it |
| Without dmx512 signal | Keep | Working as it is |
| Zero | The motors returns to the position and stops running |
| Screen Saver | On | Turn off backlight after 30 seconds |
| Off | Backlight always works |
| Default setting | | Press keyboard “ENTER” to make sure the dislog box. Press “ENTER” again to restore default setting |
